SZHSR LCD Screen Display Digitizer Touch Screen Replacement kit with Frame Repair Tools for iPhone 6 4.7inch (White)

Only fit for iPhone 6 4.7inch

Note: The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen,
so total four flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure for iPhone 6 IOS is upgraded to the latest version.
5.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away
after some time. Please leave phone alone overnight and see if this problem persists in the morning.

Package Include:
1* LCD Screen for iPhone 6 4.7inch
1* Phone Ring Stand
1* Set Repair Tool Kits
1* Retail Box
1* Instruction

• 1. Only fit for iPhone 6 4.7 inch, not for iPhone 6S / 6 Plus 5.5inch.
• 2. Please follow our instruction step by step and watch some related videos while installing.
• 3. Without home button,ear piece and front camera, all the items just same as the pictures.
• 4. If your back housing has already been damaged or depressed, please replace a new one firstly.
• 5. Replace your damaged, cracked, shattered screen, or touch response issues.Do not press aggressively on both upper corners of the new replacement screen (Remarked as Step 6 in Manual)