White LCD for iPhone 7 Plus Screen Replacement Kit Digitizer Touch Screen Display Assembly with 3D Touch, Repair Tools for 7 Plus 5.5 Inch

Only fit for iPhone 7 Plus 5.5inch

Note:
1.Only fit for iPhone 7 Plus 5.5 inch ( white£, NOT compatible for 6, 6 plus, 7, and NOT including these internal parts,such as home button, front-facing camera, proximity sensor flex cable, receiver, etc.
2. The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable from your old screen, so total three flex cables.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away Please leave phone alone overnight and see if this problem persists in the morning.

Package Include:
1* LCD Screen for iPhone 7 Plus 5.5 inch
1* Set Repair Tool Kits
1* Instruction

• 1.Only fit for iPhone 7 Plus 5.5 inch ( white£, NOT compatible for 6, 6 plus, 6s, and NOT including these internal parts,such as home button, front-facing camera, proximity sensor flex cable, receiver, etc.
• 2.Each of our product has been strictly tested before shipment.
• 3.Used to replace the shattered,scratched,cracked and fragmented screens.
• 4.Free Complete tools kit and detailed installation manual included in the package.
• 5.1 Year warranty and guaranteed customer service.